Avaya 1140E Manuale Utente Pagina 47
- Pagina / 132
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Create the device configuration file on the provisioning server 47
switching equipment necessary for setting up the required call, or for the
use of a specific service, are temporarily engaged. You can select the
country specific tone. The default tone is the North American tone.
— frequency1 - the frequency of tone 1.
— frequency2 - the frequency of tone 2.
— on_time - the duration of the tone when it is on. A -1 indicates
a continuous tone.
— off_time - the duration when no tone is played.
The IP Phone 1140E supports using WAV files to replace the ringtone
Frequency/Cadence pattern. For a system-wide setting, the country
default values can be used.
NAT configuration commands
•
NAT_SIGNALLING [NONE | SIP_PING | STUN] indicates the type
of protocol used for NAT traversal in the signaling port. The IP Phone
1140E with SIP Firmware supports two methods of NAT traversal of the
signaling path: SIP_PING and STUN.
— NONE - If the value is not set to None, this parameter overr ides the
value of the parameter SIP_PING in the device configuration file.
— SIP_PING - a Nortel proprietary NAT traversal protocol. Note that
SIP_PING only supports NAT traversal in the signaling port.
— STUN - the most common NAT traversal method.
•
NAT_MEDIA [NONE | STUN] indicates the type of protocol used for
NAT traversal in the media ports. The default is NONE.
— NONE - is the default and disables NAT_MEDIA.
— STUN - the most common NAT traversal protocol for the media (RTP
and Real-time Control Protocol [RTCP]) port.
— x - is the binding lifetime in seconds.
ATTENTION
NAT_TTL [x] is used for future development. Currently, the default
value is 2 minutes (120 seconds) and SIP IP Phones 1120E/1140E do
not process or use the value defined in NAT_TTL [x]. SIP IP Phones
1120E/1140E always ping the ports at regular intervals of 60 seconds
regardless of the NAT_TTL value.
SIP Fir mware Release 1.1 for IP Phone 1140E Administration
NN43113-300 02.05 Standard
27 May 2008
Copyright © 2008, Nortel Networks
.
- Phone 1140E Administration 1
- Contents 3
- Index 127 5
- 6 Contents 6
- New in this release 7
- 8 New in this release 8
- How to Get Help 9
- 10 How to Get Help 10
- Introduction to this guide 11
- Related publications 13
- 14 Introduction to this guide 14
- Overview 15
- Related documentation 16
- Installation overview 17
- 18 Overview 18
- Figure 2 18
- Introduction 19 19
- Figure 3 19
- Supported SIP proxy servers 20
- Before installation 21
- Preinstallation 23 23
- 24 Before installation 24
- How provisioning works 25
- Procedure 3 26
- Figure 4 27
- Sample provisioning file 27
- IP Phone 1140E 30
- Device configuration commands 34
- ATTENTION 36
- Feature configuration commands 36
- QoS and ToS commands 44
- Tone configuration commands 45
- NAT configuration commands 47
- VQMon configuration commands 48
- System commands 50
- Dialing function description 52
- Dialing plan 52
- Figure 7 53
- Figure 8 53
- Figure 9 54
- Figure 10 55
- DRegex rules 55
- Downloadable WAV files 56
- Configure the DHCP server 57
- Full DHCP mode 58
- SIP IP Phone class identifier 59
- DHCP VLAN Auto Discovery 61
- 62 Configure the DHCP server 62
- Procedure 4 63
- Installing the IP Phone 1140E 63
- Figure 11 65
- IP Phone 1140E connections 65
- 1140E firmware 67
- Procedure 6 68
- Procedure 7 69
- 3. [FW] Finished 77
- Voice Quality Monitoring 79
- Server set-up 80
- How VQMon works 80
- Introduction 81
- Authorization 83
- Device ID 83
- Password 83
- NO DHCP mode 83
- Net Mask 84
- Voice VLAN 84
- VLAN Filter 85
- Disable PC Port 85
- Data VLAN 86
- PC-Port Untag all 86
- Ignore GARP 87
- Provisioning 87
- NAT Traversal 88
- PVQMon IP 88
- Configure the device settings 89
- STUN S2 IP: 96
- (Single Call Arrangement) 97
- Privacy access codes 98
- Location information 99
- Dialing plan configuration 100
- Characteristics of E911 calls 100
- IP Phone 1140E restrictions 101
- NN43113-300 02.05 Standard 102
- 27 May 2008 102
- NAT firewall traversal 103
- 104 NAT firewall traversal 104
- Three-port switch and VLAN 105
- Phone 1140E 109
- SIP responses 110
- Default error handling 115
- SIP header fields 115
- SDP and Call Hold 119
- Transport layer protocols 119
- SIP security authentication 119
- SIP DTMF Digit transport 120
- Supported subscriptions 120
- Supported instant messaging 120
- Nortel unencrypted Yes 121
- Nortel encrypted Yes 121
- Procedure 14 123
- Reloading UNIStim Firmware 123
- IP Phone 1140E diagnostics 124
- Symbols/Numerics 127
- 128 Index 128
- Index 129 129
- 130 Index 130
Prodotti e manuali riguardandi Telefoni VoIP Avaya 1140E
Telefoni VoIP Avaya 1110 Guida Utente
(30 pagine)
(30 pagine)
Telefoni VoIP Avaya BCM Call Center Manuale Utente
(138 pagine)
(138 pagine)
Telefoni VoIP Avaya 0604D9F Manuale Utente
(8 pagine)
(8 pagine)
Telefoni VoIP Avaya R4.3 Manuale Utente
(376 pagine)
(376 pagine)
Telefoni VoIP Avaya 1165E Guida Utente
(376 pagine)
(376 pagine)
Telefoni VoIP Avaya IP Phone 2001 Guida Utente
(14 pagine)
(14 pagine)
© 2020, manymanuals.it. Tutti i diritti riservati | 0.034 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale