Avaya BRI Based Video Conferencing on BCM Technical Guida di Configurazione Scaricare il pdf (Pagina 8)

BCM Technical Configuration Guide V1.1 May, 2006

_______________________________________________________________________________________________________________________

NORTEL External Distribution

MBM

• Install onto appropriate BUS & Activate

• Get Loop numbers

• Activate Loops

ISDN

DNs

• Select DNs

• Assign target line

•Configure OLI

Loops

• Configure as “s” interface

• Assign DNs

Routing

• Verify PRI pool correctly programmed

Target

Line

• Map incoming spill

Polycom

• Program DNs

• Disable H.323 & SIP

• Configure SPIDs

Figure 2: Configuration Flow

2.3 MBM

The objective of the following steps is to insert and activate the ISDN Basic Rate Interface (BRI) MBM into the

BCM.

Firstly, identify an available BUS, and set the dip switches accordingly; in this example, we are using BUS 06.

Once inserted, set the programming to “Trunk Module”.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 18 19

Nessun commento

Avaya BRI Based Video Conferencing on BCM Technical Guida di Configurazione Pagina 8