Avaya Troubleshooting Routers Guida alla Risoluzione dei Problemi Scaricare il pdf (Pagina 195)

Using the Technician Interface to Configure and Run Packet Capture

B-7

Get the number of the logical line from which you want to copy packets as

follows:

1. Enter the following Technician Interface command to display the base

line number:

get wfDs1E1PortMapEntry.4.

<slot>

4 represents the wfDs1E1PortMapLineNumber attribute (parameter).

Example

Enter the following to get the base line number of Connector 1 on an MCT1

I/O module in Slot 2.

get wfDs1E1PortMapEntry.4.2.1

In this example, the response is

902101

2. Enter the following command to display the logical line number:

get wfLogicalLineEntry.7.

<base_line_number>

<index>

7 represents the wfLogicalLineNumber attribute (parameter).

<base_line_number>

is the response to the command you entered in Step 1.

<index>

is the position of the logical line on the circuit.

Example

Enter the following to get the number of Logical Line 1 from the example in

Step 1:

get wfLogicalLineEntry.7.902101.1

In this example, the response is

10902101

Enter the following command to create an instance:

set wfPktCaptureEntry.1.

<line_no.>

1;commit

The ﬁrst 1 represents the wfPktCaptureDelete attribute.

<line_no.>

is the response to the command you entered in Step 2. To list the

current line numbers associated with Packet Capture, enter the

list instances

wfPktCaptureEntry command.

1 2 ... 190 191 192 193 194 195 196 197 198 199 200 ... 253 254

Nessun commento

Avaya Troubleshooting Routers Guida alla Risoluzione dei Problemi Pagina 195