Avaya BCM50 Manuale Utente Scaricare il pdf (Pagina 21)

Chapter 3 Hardware installation 21

Installation Checklist and Quick Start Guide

• If this is the last unit on a BCM50 system with multiple units, remove the alignment tabs

on the left side of the wall-mount bracket.

5 Hang the wall-mount bracket on the mounting screw.

6 Install two #8 x 2 cm (#8 x 0.75 in.) round-head wood screws into the screw holes in the

wall-mount bracket. See the figure Wall-mount bracket on page 20.

7 Tighten the three wood screws against the wall-mount bracket.

8 Install two #8 x 2 cm (#8 x 0.75 in.) round-head wood screws into the screw holes in the cable

trough.

9 Repeat steps 2 to 8 for each additional unit.

To install a BCM50 unit on the wall-mount bracket

1 Insert the power-supply retention clip into the BCM50 unit.

2 Slide the wall-mount lock fully to the right (unlock position). See the figure Wall-mount lock

in unlock position on page 21.

Figure 5 Wall-mount lock in unlock position

3 Align the feet on the BCM50 unit with the four holes in the wall-mount bracket.

4 Press the unit against the wall-mount bracket and slide the unit down until it clicks in place.

5 Slide the wall-mount lock to the left (lock position).

6 Use the supplied screw to secure the wall-mount lock in position.

7 Repeat steps 1 to 6 to install additional BCM50 units.

8 Install the BCM50 power supply using a method appropriate for your environment.

The power supply must be within 1.5 m (5 feet) of the BCM50 unit and within 1.5 m

(5 feet) of the ac power outlet (wall outlet or UPS).

9 Repeat step 8 for each BCM50 power supply.

6 minutes

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 45 46

Nessun commento

Avaya BCM50 Manuale Utente Pagina 21