Avaya Configuring IP Multicasting and Multimedia Services Manuale Utente Scaricare il pdf (Pagina 54)

Configuring IP Multicasting and Multimedia Services

3-22

303527-A Rev. 00

Configuring an IGMP Boundary Group

You configure an IGMP boundary group by supplying a range of multicast group

addresses (expressed as an address and a prefix) and a list of IP interfaces. No

multicast group address that falls within the range you specify is accepted or

forwarded on the interfaces you specify.

You can use Site Manager to define an IGMP boundary group.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

IGMP

. The IGMP menu opens.

4. Choose

Boundaries

. The IP Boundary Group window opens.

5. Set the following parameters:

•Enable

• Group Address

• Prefix Length

• Circuit List

• Tunnel List

Click on

Help

or see the parameter

descriptions beginning on page A-51

6. Click on

Apply

, and then click on

Done

. You return to the Configuration Manager

window.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 233 234

Nessun commento

Avaya Configuring IP Multicasting and Multimedia Services Manuale Utente Pagina 54