Avaya Configuring and Troubleshooting Bay Dial VPN (DVS) Networks Manuale Utente Pagina 97

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
Vedere la pagina 96
Configuring the TMS Using Local RADIUS
302272-A Rev. 00 6-9
TMS System Log (Syslog) Messages
TMS writes its system and error messages to the system log file, syslog. These
messages are interspersed with other syslog messages in chronological order of
occurrence. For the complete list of syslog messages, see B, “Syslog Messages.”
Annex-Addr-Resolution-Servers
146.146.146.200
paddr, saddr
146.146.146.200
For multiple servers, use the
format IPaddr1, IPaddr2.
If Annex-User-Server-Location
is local,
Annex-Addr-Resolution-Servers
should be locally available (same
network as the BSAC server).
This attribute is not used if the IP
pooling feature on the
authentication server is active for
same tunnel (BSAC only, and
only for non-MP calls).
Tunnel-Password
up to 32 hexadecimal characters
takey
up to 32 hexadecimal charac-
ters
Make sure dictionary is set for HEX
values on this attribute.
Annex-Sec-Profile-Index
1234
spi
1234
If no
spi
(or
spi
=0), then
tatype
,
tamode
,
takey,
or their RADIUS
equivalents are not needed.
Annex-Tunnel-Authen-Type
kmd5-128
tatype
kmd5-128
Annex-Tunnel-Authen-Mode
prefix-suffix
tamode
pref-suff
Annex-Local-username
no value assigned
no TMS equivalent Required for all tunnels (locally and
remotely authenticated).
Annex-Domain-Name
no value assigned
no TMS equivalent Do not use. Reserved for future use.
Tunnel-Medium-Type
IP
no TMS equivalent Not required, but specify IP if used.
Table 6-5. TMS Parameter Equivalents
(continued)
RADIUS/BSAC Parameter
erpcd parameter
Notes
Vedere la pagina 96
1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 187 188

Commenti su questo manuale

Nessun commento