
Installing and Maintaining BN Platforms
3-14 109352-E Rev. A
Install the BCN in the electronic enclosure rack as follows:
1. Insert the BCN in the rack as shown in Figure 3-6. Make sure the BCN
rests squarely on the angle brackets.
Figure 3-6. Mounting the BCN to the Rack
Note: Before putting the BCN in the rack, ensure that the rack holes are
threaded. If they are not threaded, place cage nuts over the front vertical
support holes.
Screw
(4 Places)
If rack rail is not threaded,
attach cage nut.
Rail
Cage nut
Commenti su questo manuale