Avaya Configuring IP, ARP, RIP, and OSPF Services Manuale Utente Pagina 266

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 362
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 265
Configuring IP, ARP, RIP, and OSPF Services
A-26
117356-E Rev 00
Static Route Parameters
Parameter: Enable ISP Mode Support
Path: Configuration Manager > Protocols > IP > Global
Default: Disable
Options: Enable
|
Disable
Function: Enables and disables Internet service provider (ISP) features.
Instructions: Use this parameter to configure BGP as a soloist and to disable the use of
forwarding tables on IP interfaces.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.1.19
Parameter: Percentage of ARP Buffers
Path: Configuration Manager > Protocols > IP > Global
Default: 100
Options: An integer indicating the percentage of buffers
Function: Defines the upper limit (as a percentage) of buffers that ARP can use for saving
buffers when resolving ARP requests.
Instructions: Specify the percentage as an integer.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.1.27
Parameter: Enable
Path: Configuration Manager > Protocols > IP > Static Routes
Default: Enable
Options: Enable
|
Disable
Function: Specifies the state (active or inactive) of the static route record in the IP
routing tables.
Instructions: Select Disable to make the static route record inactive in the IP routing table;
the IP router will not consider this static route. Select Enable to make the
static route record active again in the IP routing table.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.5.1.2
Vedere la pagina 265
1 2 ... 261 262 263 264 265 266 267 268 269 270 271 ... 361 362

Commenti su questo manuale

Nessun commento