Avaya Configuring IP, ARP, RIP, and OSPF Services Manuale Utente Pagina 288

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 362
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 287
Configuring IP, ARP, RIP, and OSPF Services
A-48
117356-E Rev 00
Parameter: Enable
Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Interfaces >
Neighbors
Default: Enable
Options: Enable
|
Disable
Function: Allows you to enable and disable this neighbor configuration for this interface.
This parameter is useful if you want to temporarily disable a neighbor
configuration rather than delete it.
Instructions: Set to Disable if you want to disable this neighbor configuration. Or set to
Enable if you previously disabled this neighbor configuration and now want to
reenable it.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.7.1.2
Parameter: Priority
Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Interfaces >
Neighbors
Default: 1
Options: 0 to 255
Function: Indicates the priority of this neighbor, with 255 indicating the highest priority.
The neighbor priority value is used in multiaccess networks for the election of
the designated router. If this parameter is set to 0, this router is not eligible to
become the designated router on this particular network.
Instructions: Either accept the default neighbor priority value or enter another value from 0
through 255.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.7.1.9
Vedere la pagina 287
1 2 ... 283 284 285 286 287 288 289 290 291 292 293 ... 361 362

Commenti su questo manuale

Nessun commento