Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manuale Utente Scaricare il pdf (Pagina 34)

Configuring IP Exterior Gateway Protocols (BGP and EGP)

2-2

308628-14.00 Rev 00

For example, the following command configures an Ethernet interface on slot 2,

connector 2:

box# ethernet slot 2 connector 2

ethernet/2/2#

Step 2: Configuring an IP Interface

To configure an IP interface on a physical interface, navigate to the prompt for the

physical interface and enter:

ip address <

address>

mask

<mask>

address

and

mask

are a valid IP address and its associated mask, expressed in

dotted-decimal notation.

For example, the following command configures IP interface 2.2.2.2/255.0.0.0 on

an Ethernet physical interface on slot 2, connector 2:

ethernet/2/2# ip address 2.2.2.2 mask 255.0.0.0

ip/2.2.2.2/255.0.0.0#

The IP interface is configured on the Ethernet interface with default values for all

interface parameters. When you configure an IP interface, the BCC also

configures IP globally on the router with default values for all IP global

parameters.

You customize IP by modifying IP global and interface parameters as described in

Chapter 4, “Configuring and Customizing IP for BGP

.”

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 307 308

Nessun commento

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manuale Utente Pagina 34