
303560-A Rev 00
2-87
enabled
Displays the ATM DXI interfaces that are configured as enabled. For more information on
column definitions, see the
lines
command.
Sample Display - show atmdxi enabled
ATM Data Exchange Interface (DXI) Line Enabled Table
----------------------------------------------------------
Line.LLIndex Circuit Mode State
------------ ------- -------- -------
2.0 NONE Enabled NotPres
lines
[
<line.llindex>
]
Displays all ATM DXI interfaces or a just a specific line. The table includes the following
information:
Line.LLIndex Identifier of the line and line level.
Circuit Name or number of the circuit that the interface runs on.
Mode Mode for which the interface has been configured; enabled or
disabled.
State State of the line, as follows:
•
Down
- Line is disabled.
•
Init
- Line is initializing.
•
NotPres
- Line is not functioning.
•
Up
- Line is functioning fully.
VCs Number of virtual circuits enabled for the line.
Converg. Sublayer Convergence sublayer configuration of the line: AAL3/4, AAL5,
or None. AAL3/4 is ATM Adaption Layer 3/4. AAL5 is ATM
Adaption Layer 5.
Encaps Multiprotocol Encapsulation that the PVC uses : RFC1294,
RFC1483, or None.
Drop Number of frames dropped at the line level.
Commenti su questo manuale