Avaya Using Technician Interface Scripts Manuale Utente Pagina 311

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 788
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 310
show fddi
2-259
port
Displays FDDI port attributes. The table includes the following information:
Slot Slot identifier associated with the port.
Conn Connector identifier associated with a port.
Local Port Physical connector type of the local port, as follows:
A – Port is a dual attachment station or concentrator that attaches
to the primary IN and the secondary OUT when attaching to the
dual FDDI ring.
B – Port is a dual attachment station or concentrator that attaches
to the secondary IN and the primary OUT when attaching to the
dual FDDI ring.
M – Port is in a concentrator that serves as a Master to a
connected station or concentrator.
S – Port is in a single attachment station.
Unknown – Type of the port is unknown.
Neighbor Port Type Physical connector type of the remote port: A, B, M, S, Unknown.
Physical State State of Physical Connection Management (PCM) for each port
within SMT. PCM initializes the connection of neighboring ports
and manages signaling between ports. PCM provides the necessary
signaling to initialize a connection, withhold a marginal
connection, and support maintenance features. PCM passes
through a variety of states, as follows:
Off – Initial state of PCM.
Break – Starting a PCM connection.
Trace – Localizing a stuck beacon condition, which indicates that
the interface doesn’t see the token. This state should be a
transient condition. If it persists, contact your customer service
representative.
Connect – Synchronizing the ends of the connection for the
signaling sequence.
Next – Separating the signaling performed in the SIGNAL state.
Signal – Communicating individual bits of information across the
connection.
JoinAssuring that both ends of the connection enter the
ACTIVE state together when signaling has completed.
Verify – Leading to an active connection.
Active – Incorporating the port into the token path.
Maint – Detecting maintenance state.
Link Error Monitor Count Number of times a link has been rejected.
Vedere la pagina 310
1 2 ... 306 307 308 309 310 311 312 313 314 315 316 ... 787 788

Commenti su questo manuale

Nessun commento