Avaya BCM 2.0 Programming Guida Utente Pagina 281

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 446
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 280
Maintenance 281
P0911588 Issue 01 Enterprise Edge 2.0 Programming Operations Guide
Disable a device
Use the following procedure to disable a device immediately.
1. Identify the device you wish to disable. For information on how to perform
this procedure, refer to Identify a device connected to the system on page 280.
2. On the Configuration menu click Disable.
The system displays a warning that this action will disable the port.
3. Click OK.
The system disables the device in one minute (or immediately, if the device is
idle). Press Cancel to leave this display without disabling the device.
Enable a device
Use the following procedure to enable a disabled device:
1. Identify the device you wish to disable. For information on how to perform
this procedure, refer to Identify a device connected to the system on page 280.
2. Click on the device you want to enable.
3. On the Configuration menu click Enable.
The system displays a message indicating that the device is being enabled.
Give notice that you are disabling equipment.
Inform people that you are going to disable their devices.
Pick a suitable time to disable devices. Disabling a port will disconnect
users from their calls.
Do not disable devices when many people are using the Enterprise Edge
system. Wait until after regular office hours.
Do not enable or disable ports during the first two minutes after plugging
in your system.
If you enable or disable ports in the first two minutes after powering up,
incorrect ports may be enabled or disabled. To recover from this, disable, then
enable the affected modules using the Media Bay Modules selection.
Vedere la pagina 280
1 2 ... 276 277 278 279 280 281 282 283 284 285 286 ... 445 446

Commenti su questo manuale

Nessun commento