Avaya BCM 2.0 Programming Guida Utente Scaricare il pdf (Pagina 386)

386 Appendix B: ISDN Overview

Enterprise Edge 2.0 Programming Operations Guide P0911588 Issue 01

Method 2:

Use incoming Call by Call (CbC) Service routing to map the call type to the

DISA DN. Refer to Call Routing on page 128 for more information.

With FX, INWATS, 900, and SDS service types, either a Service Id (SID) or a

CDN is mapped to Target Line Receive Digits. This is programmed under

Call by Call Service routing on page 130. DISA may be accessed by having

the SID or CDN map to the DISA DN. This example has a Receive Digit

Length = 4,

DISA DN = 1234, and CbC Routing with (Service Type = FX, Map from SID

= 2, Map to digits = 1234).

A call presented to the Enterprise Edge system with service type FX and

SID 2 will be handled as follows:

• The ISDN setup message will specify FX with SID = 2

• The FX SID = 2 will be mapped to DISA DN digits 1234

ThecallwillbeansweredwithDISA.

Program ISDN equipment

PRI modules support various applications that are enabled by PRI. For a list of the

type of applications that are supported, refer to theEnterprise Edge Feature

Programming Telephone Guide.

Terminal equipment for BRI cards

ISDN devices and terminals connected to the Enterprise Edge system must be

configured under Services, Telephony Services, Loops. You choose directory

numbers for ISDN equipment from a pre-determined range of DNs (501-528). Any

of the ISDN DNs can be assigned to an S loop but each can only be assigned to one

loop and a single device.

DevicesonanSloop(BRIcardsonly)

Terminal equipment using an S loop must be assigned an ISDN directory number

(ISDN DN). This allows the TE to be assigned lines and to communicate with other

devices connected to the Enterprise Edge system. Each DN can be assigned to only

one TE and one loop.

You assign ISDN DNs to S loops from the Telephony Services subheading, under

Loops, DNs on Loop, Assign DNs.EachSloopcanbeprogrammedwitheight

ISDN DNs, but you cannot exceed a total of 28 ISDN DNs for the Enterprise Edge

system.

Loop DN (North America)

Once you have assigned ISDN DNs to a loop, designate one of the DNs as a Loop

DN. The Loop DN acts as a main ISDN DN and completes the configuration of the

loop.

1 2 ... 381 382 383 384 385 386 387 388 389 390 391 ... 445 446

Nessun commento

Avaya BCM 2.0 Programming Guida Utente Pagina 386