Avaya BCM 2.0 Programming Guida Utente Pagina 60

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 446
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 59
60 Configuring Enterprise Edge Resources
Enterprise Edge 2.0 Programming Operations Guide P0911588 Issue 01
5. In the Confirm Password box, type your password again.
6. In the Channel list, select the channel the connection must use.
7. Click Save to save your settings.
The newly created ISDN interface is displayed under ISDN.
Configuring an ISDN interface
To configure an ISDN interface:
1. Under Resources, Dial Up, ISDN, click on the interface you want to
configure.
The ISDN Summary, ISDN Link Parameters, ISDN Access Parameters and
ISDN Channel Characteristics screens are displayed.
2. Use the following table to configure the ISDN Summary settings:
ISDN Summary:
Attribute Description
Interface Shows the name of the ISDN interface selected.
IPAddress Lets you set the IP address of the ISDN interface when it connects. You can
set a fixed IP address for the dial-up interface. You can select
RemoteAssigned to indicate that Enterprise Edge must obtain an IP address
from the remote end. The address obtained depends on the RAS server to
which Enterprise Edge connects.
The default value is RemoteAssigned.
Description Shows a description of the interface.
Status Lets you view and set the ISDN interface resource status. Possible values are:
Up: the ISDN interface is currently connected. Also used to force the interface
to initiate a connection.
Down: the ISDN interface is not currently connected.
Enabled: the ISDN interface is enabled for use.
Disabled: the ISDN interface is currently disabled.
You cannot select an ISDN interface that is set to “RemoteAssigned” as the
Local Gateway IP for the VoIP Gateway.
Vedere la pagina 59
1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 445 446

Commenti su questo manuale

Nessun commento